Adjust the test based on the time range of the room injector.

调整测试基于时间范围的房间注入器。

data/levelGraphs/test.json

@@ -46,7 +46,7 @@
         "res://prefab/roomTemplates/dungeon/"
       ],
       "Tags": null,
-      "RoomInjectionProcessorData": "[\n    {\n        \"Id\": \"Chance\",\n        \"Config\": \"{\\\"Chance\\\":35.5}\"\n    }\n]"
+      "RoomInjectionProcessorData": "[\n    {\n        \"Id\": \"TimeInterval\",\n        \"Config\": \"{\\\"DateSpecifiesLevel\\\":0,\\\"StartTime\\\":\\\"2024/1/1 20:34:23\\\",\\\"EndTime\\\":\\\"2025/1/1 20:34:23\\\"}\"\n    }\n]"
     }
   ]
 }

locals/Log.csv

@@ -17,3 +17,4 @@ place_existing_rooms,放置已存在的房间{0}。,Place existing rooms {0}.,
 room_placement_failed,房间{0}放置失败。,Room {0} placement failed.,部屋{0}の放置に失敗します。
 room_placement_information,房间{0}已被成功放置在{1}。,Room {0} has been successfully placed in {1}.,部屋{0}を{1}に配置しました。
 room_injection_processor_does_not_exist,找不到房间注入处理器{0}，请检测是否在MapGenerator内注册。,"Room injection processor {0} not found, check to see if it is registered in MapGenerator.",部屋注入プロセッサ{0}が見つかりません、MapGenerator内に登録されているかどうか検出してください。
+time_range_debug,当前时间：{0}起始时间：{1}，结束时间{2}，是否在范围内{3},"Current time: {0} Start time: {1}, end time {2}, whether in range {3}",現在時間:{0}開始時間:{1}終了時間{2}範囲内かどうか{3}です

scripts/map/roomInjectionProcessor/TimeIntervalRoomInjectorProcessor.cs

@@ -35,16 +35,47 @@ public class
             configData.EndTime = configData.StartTime;
         }
 
-        var now = DateTime.Now;
+        if (configData.DateSpecifiesLevel == null)
-        if (!configData.SpecifiedYear)
         {
-            //If no year is specified, it is automatically added to the current year
+            //If no date level is specified, the default is 0
-            //若未指定年份，则自动补充为当前年份
+            //若未指定日期等级，则默认为0
-            var nowYear = now.Year;
+            configData.DateSpecifiesLevel = 0;
-            configData.StartTime = $"{nowYear}-{configData.StartTime}";
-            configData.EndTime = $"{nowYear}-{configData.EndTime}";
         }
 
+        var now = DateTime.Now;
+        var nowYear = now.Year;
+        var nowMonth = now.Month;
+        switch (configData.DateSpecifiesLevel)
+        {
+            case 0:
+                //The complete time is specified in the format yyyy/MM/dd hh:mm:ss
+                //指定了完整的时间，格式如：yyyy/MM/dd hh:mm:ss
+                break;
+            case 1:
+                //No year is specified. The format is mm/dd hh:mm:ss
+                //未指定年份。格式如：MM/dd hh:mm:ss
+                configData.StartTime = $"{nowYear}/{configData.StartTime}";
+                configData.EndTime = $"{nowYear}/{configData.EndTime}";
+                break;
+            case 2:
+                //No year and month are specified. The format is dd hh:mm:ss
+                //未指定年份和月份。格式如：dd hh:mm:ss
+                configData.StartTime = $"{nowYear}/{nowMonth}/{configData.StartTime}";
+                configData.EndTime = $"{nowYear}/{nowMonth}/{configData.EndTime}";
+                break;
+            case 3:
+                //No year, month, and day are specified. The format is hh:mm:ss
+                //未指定年份、月份和日期。格式如：hh:mm:ss
+                configData.StartTime = $"{nowYear}/{nowMonth}/{now.Day} {configData.StartTime}";
+                configData.EndTime = $"{nowYear}/{nowMonth}/{now.Day} {configData.EndTime}";
+                break;
+            case 4:
+                //No year, month, day, and hour are specified. The format is mm:ss
+                //未指定年份、月份、日期和小时。格式如：mm:ss
+                configData.StartTime = $"{nowYear}/{nowMonth}/{now.Day} {now.Hour}:{configData.StartTime}";
+                configData.EndTime = $"{nowYear}/{nowMonth}/{now.Day} {now.Hour}:{configData.EndTime}";
+                break;
+        }
         return Task.FromResult(TimeUtils.IsBetweenTimeSpan(now, configData.StartTime, configData.EndTime));
     }
 
@@ -52,33 +83,25 @@ public class
     public class ConfigData
     {
         /// <summary>
-        /// <para>Whether to specify a year</para>
+        /// <para>Date specifies the level</para>
-        /// <para>是否指定年份</para>
+        /// <para>日期指定的等级</para>
         /// </summary>
         /// <remarks>
-        ///<para>If true, then Year can be specified in StartTime and EndTime. The specified year is used to be executed only once in a given year, while configurations that do not specify a year are automatically replenished with the current year (performed annually).</para>
+        ///<para>Level 0: Specify complete yyyy/MM/DD hh:mm:ss, level 1: yyyy (year automatically uses this year), Level 2: yyyy/MM (year and month automatically uses this month), Level 3: yyyy/MM/DD (automatically uses today), level 4: yyyy/MM/dd hh(The current hour is automatically used)</para>
-        ///<para>如果为true，那么可以在StartTime和EndTime内指定Year。指定年份被用于在特定的年份仅执行一次，而未指定年份的配置会自动补充为当前年份（每年执行）。</para>
+        ///<para>等级0：指定完整的yyyy/MM/dd hh:mm:ss，等级1：yyyy（年份自动采用今年），等级2：yyyy/MM（年份和月份自动采用本年本月），等级3：yyyy/MM/dd（自动采用今天），等级4：yyyy/MM/dd hh(自动采用当前小时)</para>
         /// </remarks>
-        public bool SpecifiedYear { get; set; }
+        public int? DateSpecifiesLevel { get; set; }
 
         /// <summary>
         /// <para>Start time</para>
         /// <para>起始时间</para>
         /// </summary>
-        /// <remarks>
-        ///<para>If the year is not specified, enter data in the format MM-DD hh:mm:ss. If the year is specified, enter data in the format yyyy-MM-dd hh:mm:ss.</para>
-        ///<para>若未指定年份，则可填入格式为MM-dd hh:mm:ss的数据，若指定了年份，那么请填入yyyy-MM-dd hh:mm:ss格式数据。</para>
-        /// </remarks>
         public string? StartTime { get; set; }
 
         /// <summary>
         /// <para>End time</para>
         /// <para>结束时间</para>
         /// </summary>
-        /// <remarks>
-        ///<para>See StartTime</para>
-        ///<para>同StartTime</para>
-        /// </remarks>
         public string? EndTime { get; set; }
     }
 }

scripts/utils/TimeUtils.cs

@@ -1,4 +1,5 @@
 using System;
+using ColdMint.scripts.debug;
 
 namespace ColdMint.scripts.utils;
 
@@ -27,6 +28,8 @@ public static class TimeUtils
         var dtEndTime = Convert.ToDateTime(endTime);
         var compNum1 = DateTime.Compare(dateTime, dtStartTime);
         var compNum2 = DateTime.Compare(dateTime, dtEndTime);
-        return compNum1 >= 0 && compNum2 <= 0;
+        var result = compNum1 >= 0 && compNum2 <= 0;
+        LogCat.LogWithFormat("time_range_debug", dateTime, dtStartTime, dtEndTime, result);
+        return result;
     }
 }